PAPER

2025年度

K. Dejima*, T. Yabuki, "Flow estimation near a heating surface in the saturated pool boiling of water via thermal image velocimetry", International Journal of Heat and Mass Transfer, 242 (2025), 126833. https://doi.org/10.1016/j.ijheatmasstransfer.2025.126833

K. Dejima*, Y. Wakisaka, T. Yokoyama. K. Kawasaki, K. Yamane, "Development of an advanced MEMS sensor for the simultaneous measurement of ion current and heat flux during flame–wall interactions", Experimental Thermal and Fluid Science, 163 (2025), 111422. https://doi.org/10.1016/j.expthermflusci.2025.111422

2024年度

K. Dejima*, O. Nakabeppu, "Conduction-strain model for heat transfer characterization in internal combustion engines", International Journal of Engine Research, 25(6) (2024), pp.4396-4412. https://doi.org/10.1177/14680874241227256

河崎澄*, 山根浩二, 出島一仁, 振動計測に基づくディーゼルインジェクタの針弁動作検査法, 自動車技術会論文集, 55(3) (2023-2024), pp. 424-429. https://doi.org/10.11351/jsaeronbun.55.424

2023年度

K. Dejima*, O. Nakabeppu, "Correlation between heat transfer and flow in an internal combustion engine evaluated with a MEMS sensor", International Journal of Engine Research, 24(10) (2023), pp.4396-4412. https://doi.org/10.1177/14680874231167203

2021年度

K. Dejima*, O. Nakabeppu, J. Moussou, G. Pilla, "Application of a MEMS heat flux sensor to heat transfer research on an impinging diesel jet", International Journal of Engine Research, 23(3) (2022), pp.497-511. https://doi.org/10.1177/1468087420988448
正誤表（corrigenda）

K. Dejima*, O. Nakabeppu, "Local instantaneous heat flux measurements in an internal combustion engine using a MEMS sensor", Applied Thermal Engineering, 201 (2022), 117747. https://doi.org/10.1016/j.applthermaleng.2021.117747

K. Dejima*, O. Nakabeppu, "Attempt of estimating flow characteristics from wall heat fluxes measured using a three-point micro-electro-mechanical systems sensor", International Journal of Engine Research, Vol.22, Issue 6 (2021), pp.1974-1984. https://doi.org/10.1177/1468087420917287

2020年度

竹村知浩，河崎澄*，山根浩二， "超高圧噴射を適用したディーゼル噴霧および噴霧火炎の発達特性"， 自動車技術会論文集，51(4) (2020), pp.589-594. https://doi.org/10.11351/jsaeronbun.51.589

K. Kawasaki*, K. Yamane, R. Umeno, "Control of the distillation curve of biodiesel fuel by cross-metathesis reaction based on fatty-acid composition", SAE Int. J. Advances & Curr. Prac. in Mobility, Vol.2, Issue1 (2020), pp.330-336. https://doi.org/10.4271/2019-01-2187

2019年度

K. Dejima*, O. Nakabeppu, Y. Nakamura, T. Tsuchiya, K. Nagasaka, "Three-point MEMS heat flux sensor for turbulent heat transfer measurement in internal combustion engines", International Journal of Engine Research, Vol.20, Issue7 (2019), pp.696-705. https://doi.org/10.1177/1468087418770308

近藤千尋*，佐野広季，一宮暢希，山根浩二，河崎澄， "多量の含油排水からの油分回収およびBDF製造"， 日本機械学会論文集，Vol.85, No.874 (2019). https://doi.org/10.1299/transjsme.18-00340

井上 翔太，河﨑澄*，山根浩二， "尿素水の凝固点降下を目的としたメタノール添加がSCR触媒の浄化性能に及ぼす影響"， 自動車技術会論文集，Vol.50, No.2 (2019), pp.317-322. https://doi.org/10.11351/jsaeronbun.50.317